Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Is the x line front entry then part time? As I couldn't tell from the pics on the web site. ...looking like I just need to wait till I can afford the sky vac then. Done a couple of gutter jobs today and got to say standing at the top off a ladder has lost its appeal ...a vac is a must I reckon.Wouldn't buy a front entry gutter vac from anywhere. Whilst the package, 30' poles, camera and vac is well priced, the vac looks as if its plastic. If it is this could make converting it to a side entry very hard.
https://www.xline-systems.co.uk/en/xline-shop-2/gutter-vac-systems/xline-3500w-gutter-vac-carbon-poles-complete-package-256-269-detailIs the x line front entry then part time? As I couldn't tell from the pics on the web site. ...looking like I just need to wait till I can afford the sky vac then. Done a couple of gutter jobs today and got to say standing at the top off a ladder has lost its appeal ...a vac is a must I reckon.
Thanks for the advice part time much appreciated.https://www.xline-systems.co.uk/en/xline-shop-2/gutter-vac-systems/xline-3500w-gutter-vac-carbon-poles-complete-package-256-269-detail
Yes mate, before you start spending big money on branded gutter vacs search this site for information. Might save yourself a bob or two and get something that will do the job well
Why not a front entry vac.....Wouldn't buy a front entry gutter vac from anywhere. Whilst the package, 30' poles, camera and vac is well priced, the vac looks as if its plastic. If it is this could make converting it to a side entry very hard.
On "leafy" jobs they block constantly, they also tend to have the 38mm entry rather then the 51mm side entry vacs. If you're just doing the odd residential job then a cheap and cheerful could well suit you best.Why not a front entry vac.....
I use the Sky Industrial which in all likely is far too expensive for what you require, hope that doesn't sound bad. There are hundreds of posts on gutter vacs so as we've all got many hours on our hands have a good search on here.Which vac would recommend that has the side entry and 51 diameter hole.
Thanks
You can buy a Maxblaster for £200 and buy a Spinaclean 51mm inlet for £80 and bolt it on like I did. Then you need to buy the hose and cuffs which comes to under £200 so in the end its less than £500. Then buy carbon poles from ebay for £400 and a £200 camera if you need it. You will make your money back in no time is what I have found out.I use the Sky Industrial which in all likely is far too expensive for what you require, hope that doesn't sound bad. There are hundreds of posts on gutter vacs so as we've all got many hours on our hands have a good search on here.