Welcome to the UK Window Cleaning Forums

Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

Please help guys

WCF

Help Support WCF:

Andy1979

Well-known member
Messages
188
Location
Midlands
Guys,

Just looking to start out and my mind is blown with all the different kit out there. Will this kit be good enough to get me up and running.

Thanks for your input guys

https://www.windowcleaningforums.co.uk/pages/ppmmap



BATTERY No Battery 85ah deep Cycle Leisure Battery (+£70.83)

DI FILTER 700ml DI Cartridge (-£54.17) 6.9L Pressure Vessel (-£12.00) 11L Pressure Vessel 25L Pressure Vessel (+£62.50) 2 x 11L Pressure Vessel (+£87.50)

HOW MANY USERS 1 User (1 x Pump & 1 x Controller) 2 User (2 x Pump & 2 x Controller) (+£249.99)

POLES 18ft Water Genie Hammerhead Fibre Glass Poles No Pole (-£61.00) 27ft Water Genie Hammerhead Fibre Glass Poles (+£43.13)

TANK SIZE 250L Upright Tank 250L Flat Tank 350L Upright Tank (+£4.17) 350L Flat Tank (+£4.17) 400L Upright Tank (+£66.66) 400L Flat Tank (+£66.66) 500L Upright Tank (+£104.17) 500L Flat Tank (+£104.17) 650L Upright Tank (+£125.00) 650L Flat Tank (+£125.00) 1000L Upright Tank (+£212.50) 1000L Flat Tank (+£212.50) 210L Upright Tank (+£25.00) 210L Flat Tank (+£25.00)

VAN PORTS 2 port with fittings (+£13.94) 3 port with fittings (+£20.59) 4 port with fittings (+£24.24)

£604.17

You will earn 725 points which is the equivalent of £6.02

SEND TO A FRIEND

DESCRIPTION











THE CLEANING WAREHOUSE LTD

This is a Budget DIY system for anyone living in a soft water area (although it can be used in hard water regions it is not recommended)

Simply follow the guide/instructions to install this kit into your van and be able to purify water in seconds.

This kit is The Cleaning Warehouse's entry level DI system and is perfect for those who do not do much in waterfed cleaning or for those on a budget.

All you need to add is a battery to make this kit work

For more information simply call our sale team on 01902 637402

This system listed is a DIY 350l Water fed pole kit and will include the following:

. 350l Baffled water tank: height 750mm, width 520mm, length 990mm

. 11l DI vessel with hoselock fittings

. 25l Bag of Tulsion DI Mixed bed resin

. Metal Hose reel complete with 8mm minibore hose and tap

. Varistream Pump controller

. Shurflo 100psi 5.2lpm pump

. Handheld TDS meter

. Valves and Fittings

. 17ft Unger water fed pole with brush head and fittings

 
First of all, do you know your tap TDS reading? That will determine whether you need just a DI vessel to make your pure or an RO.

Do you have a van and how much payload has it got? Get the biggest tank your vehicle will allow including all your other tools.

If you can afford a full carbon pole, buy one instead of the cheapo ones they sell in your link.

After you've answered these questions, we can then go forward a little bit more with your other questions.

 
Hi Tuffers,

I have tested my water today and it's some ware between 80 / 100 not one 100% sure as it's not a digital tester I am waiting for one to be delivered.

I am looking to get a small van properly a fiat so was thinking about a 350lt tank. /emoticons/smile.png

 
I live in a town house with allocated parking. I can run the hose pipe to the van no problem put I wouldn't be able to leave it out long enough to fill it via a RO that's the reason for going down the DI only route just hopping the running costs are not to high /emoticons/smile.png

 
andy have you done any ladder work mate

it would be so much easier to do ladders first then go down the WFP road later

cheaper and less hassle

 
I live in a town house with allocated parking. I can run the hose pipe to the van no problem put I wouldn't be able to leave it out long enough to fill it via a RO that's the reason for going down the DI only route just hopping the running costs are not to high /emoticons/smile.png
What I'd do is fill your tank with tap water and run it through the DI in the van. Get a second DI to save your resin after the TDS starts to creep up on the first one. Filling the tank with tap water would mean that you could fill it quicker and gives you less chance of someone tripping over the hose going into the van.

 
Thanks for the replies guys.

I haven't done any ladder work mate but would prefer to get the water feed pole system /emoticons/smile.png just trying to figure out the cost of running the DI with out an RO and figure out what kit to buy I don't won't to wast my money getting the wrong kit /emoticons/smile.png

 
That's the kit I was looking to buy, but after tuffers suggested to source it all seperate as a bit cheaper plus you can choose a much better pole that's what I'm gonna be doing.

Don't know how much water from the water meter will cost you but resin wise I'd say a bag lasts us a 2 months (2x11ltr vessels worth) roughly 1500ltrs a week prob bit more. And my tds from the tap is 80

That's using just one vessel, using 2 as tuffers said should make last twice as long so I'll also get another vessel.

 

Latest Posts

Back
Top