Hi guys, looking for suggestions as to if this is an issue and if so, what the problem could be. I have double di set up, water is approx 105 going into the first vessel, coming out at 8. Then after the second vessel its currently at 2. In my mind it should still be at 0 because the input to the second vessel is still low. Any ideas? Are the vessels needing replaced?
The vessels are both 10.5L. And I've double checked the readings from the inline test meter with a hand held one.
The vessels are both 10.5L. And I've double checked the readings from the inline test meter with a hand held one.