Jump to content







Before posting a new topic please use the search feature. Duplicate posts may be removed or merged with others.

Start new topic


tench0771

Broke it grrrrr

Recommended Posts

Marko067

Not with the nipping method I hope. Soon as I saw that vid I thought it was a bad idea on a Univalve.

Share this post


Link to post
tench0771
Not with the nipping method I hope. Soon as I saw that vid I thought it was a bad idea on a Univalve.

i cut it with hack saw then tryed to open it up with a scrue derver then snap :rolleyes: im guna try and glue a sleve over it then heat the hose and force in over it

Share this post


Link to post
Marko067

That's pretty much what I've done to remove them except I use a dremel to cut the ring then a screw driver to prise it open. the problem I've encountered is with getting the PU hose off even when the o clamp has been removed. It still doesn't want to come off. Boiling water poured over it helps but I usually end up cutting it lengthwise carefully with a new scraper blade.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.