Suhrly
Well-known member
- Messages
- 722
- Location
- North East
Hi guys. Hope everybody is good. I have a Pure Freedom van system and I've just changed my RO membrane for the first time after 2 years. I've put in a Axeon HF5. The TDS coming from the tap is around 350ppm with around 50/60psi. I've just flushed it for the first time for about an hour then switched to producing pure but it's only bringing it down to around 55ppm before it hits the resin! Surely it should be bringing it down to around 7ppm? Again it's a brand new membrane. Sediment filters are also brand new but I know that shouldn't make any difference to the RO output.
Is there a settling in period or should it 'work' instantly? I know my PSI from the tap isn't the greatest but it should still be working better than that? I'm baffled.
Is there a settling in period or should it 'work' instantly? I know my PSI from the tap isn't the greatest but it should still be working better than that? I'm baffled.
Last edited by a moderator: