Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Yeah have the same nozzle ?I can see you're after 25mm ID but, as you have a 350l tank like me, I use this 1" hose https://purefreedom.co.uk/1-tri-flex-transfer-hose-1m.html
and this nozzle https://purefreedom.co.uk/1-polypropylene-transfer-hose-trigger-nozzle.html.
It's great for filling the tank. Disregard this if you're not intersted in 1" hose ?
I've been using 1 inch transfer hose bought from Machine Mart with a non-submersible transfer pump seven years ago. The hose is transparent and has a winding of wire within the wall to prevent kinking. The pipe is marked FX100. It doesn't kink and is as good as the day I first used it. Though it is a little bit stiff in use especially in this cold weather. I had a look at the MM online catalogue but I couldn't find it.Yeah have the same nozzle ?
does this hose kink, split easy have you been using this hose for long the last couple of hoses I have used either split or kink.
have used the green ribbed hose but the kept split and also this clear reinforced hose this splits and kinks.
View attachment 23359
Thanks for the effort and time Davy ? think I have found one on eBay but still out to opinions or I will order tomorrow the ebay hose tomorrow otherwise.I've been using 1 inch transfer hose bought from Machine Mart with a non-submersible transfer pump seven years ago. The hose is transparent and has a winding of wire within the wall to prevent kinking. The pipe is marked FX100. It doesn't kink and is as good as the day I first used it. Though it is a little bit stiff in use especially in this cold weather. I had a look at the MM online catalogue but I couldn't find it.
Edit : I just phoned my local shop and they no longer stock the one I have, sorry @Den. I was confident they'd still have it. I've Googled FX100 transfer hose as well with no luck.
So far it’s the one you posted or this one on eBay https://www.ebay.co.uk/itm/Water-Air-Rubber-Line-Compressor-Hose-20-Bar-300psi-6mm-25mm/114129732058?var=414386673117This is the stuff you want Flexible Pond Hose only but of this seller, I have had the same hose over 5 years I have squashed it driven over and totally abused and not one single split or hole
Is this the hose you’ve got @Davy G ?I've been using 1 inch transfer hose bought from Machine Mart with a non-submersible transfer pump seven years ago. The hose is transparent and has a winding of wire within the wall to prevent kinking. The pipe is marked FX100. It doesn't kink and is as good as the day I first used it. Though it is a little bit stiff in use especially in this cold weather. I had a look at the MM online catalogue but I couldn't find it.
Edit : I just phoned my local shop and they no longer stock the one I have, sorry @Den. I was confident they'd still have it. I've Googled FX100 transfer hose as well with no luck.
Forgot you use a pump nozzle as well, so it may or may not be suitable I just have mine without any nozzleThis is the stuff you want Flexible Pond Hose only but of this seller, I have had the same hose over 5 years I have squashed it driven over and totally abused and not one single split or hole
I found that stuff ? tried variations over the years with a rigid rib and it split every time, usually sooner than you'd expect, I was at one point using 30m so I needed something that was robust and easy to store and the link I posted above is just that.Is this the hose you’ve got @Davy G ?
I bought this one last month. By far the best transfer hose I’ve seen and used.
View attachment 23367
My transfer hose runs from my IBC tank (in the back garden) through a hole in both ends of my utility room and then out the other side and then runs down the side of my driveway - to the bottom for easy filling. It's been like that since about 2014 and haven't had any splits or kinks. Mainly because it's kept straight. Well, it is doubled over on itself on the driveway but never had a problem with it.Yeah have the same nozzle ?
does this hose kink, split easy have you been using this hose for long the last couple of hoses I have used either split or kink.
have used the green ribbed hose but the kept split and also this clear reinforced hose this splits and kinks.
View attachment 23359
That’s the hard thing for me keeping it straight (no puns please ?) Ihave coil my hose due to the Ibc tank in a small keter shed, do you think this would be ok coiled is a small space?My transfer hose runs from my IBC tank (in the back garden) through a hole in both ends of my utility room and then out the other side and then runs down the side of my driveway - to the bottom for easy filling. It's been like that since about 2014 and haven't had any splits or kinks. Mainly because it's kept straight. Well, it is doubled over on itself on the driveway but never had a problem with it.
I highly recommend it.
It would be fine. It is heavy duty hose and I've driven over it lots of times. Most days when I back on to the drive, I go over it. It's quite a heavy hose though, certainly not lightweight, once it's filled with water. Especially as you use the nozzle like I do. I use 2x15m of it, connected by Pure Freedom's 1" to 1" hose connector. (I also use it with Pure Freedom's submersible 1" transfer pump (god, I sound like a PF advert! ? ).That’s the hard thing for me keeping it straight (no puns please ?) Ihave coil my hose due to the Ibc tank in a small keter shed, do you think this would be ok coiled is a small space?
It isn’t as ribbed as the normal black one from garden shops etc I normally buy, the last one that spilt last week lasted just under 2 years.I found that stuff ? tried variations over the years with a rigid rib and it split every time, usually sooner than you'd expect, I was at one point using 30m so I needed something that was robust and easy to store and the link I posted above is just that.
Looks good to me ?
Good to hear mate, it will last years without issue, far better than having to repair and replace other stuff otherwise it's a waste of money and a ? of plastic in landfill@Iron GiantOnly just got around to putting the new transfer hose on extremely lightweight and flexible initial thoughts not good, but I have bent squashed and kinked with force and it’s just bounced straight back to shape think I’m going to like it ?
View attachment 23481