Smurf
Well-known member
- Messages
- 20,533
Cheers....42.2% is not very good then dont you think?
What should a 300 gpd ro be running at approx 4 bar tap pressure?
What should a 300 gpd ro be running at approx 4 bar tap pressure?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
The rating is probs around 100psi 7 bar for membrane, might tell you in the destructions. i`ve never used smaller than 20inch RO membranes.Cheers....42.2% is not very good then dont you think?
What should a 300 gpd ro be running at approx 4 bar tap pressure?
not unless you boosted it to 100psi to combat the low water temp. as weather warms up your output will improve any way.When tested the temp was 1 c and at approx 50-60 psi so a boster would help don't you think?