Green Pro Clean Ltd
Well-known member
- Messages
- 8,103
- Location
- Nottingham & Derbyshire
Hello chaps, quick question for those that use a fair bit of resin.
I changed mine today (I have an RO primary so only need to change resin every 8 or so months)
I was up to 002ppm so decided as I was doing all the odd jobs and cleaning van today I'd best change the resin.
I did this and turned on pump and got out my TDS meter. First reading 003ppm, 30 seconds later 005ppm 1 minute later 000ppm
it has now settled to a consistent 000ppm but I am just curious if that little jump is a normal thing when changing the vessel?
I changed mine today (I have an RO primary so only need to change resin every 8 or so months)
I was up to 002ppm so decided as I was doing all the odd jobs and cleaning van today I'd best change the resin.
I did this and turned on pump and got out my TDS meter. First reading 003ppm, 30 seconds later 005ppm 1 minute later 000ppm
it has now settled to a consistent 000ppm but I am just curious if that little jump is a normal thing when changing the vessel?