Jimmybob2614
Active member
- Messages
- 44
- Location
- Norfolk
Hi, I've recently changed my RO, I also changed my pre filters and resin at the same time as they were almost needing to be so figured I'd do it all together.
Anyway, my tap water is around 450ppm, for the first 5 minutes or so of making water it's coming out (pure) starting around 20 before going down to 0 gradually, is this normal, I assume its just the RO getting up to full efficiency or something? It sits at 0 once it's there and doesn't go back up.
The water coming from the RO itself is around 12-14 so the resin is doing relatively little work.
Im using a booster pump by the way, just checking this all seems normal
Anyway, my tap water is around 450ppm, for the first 5 minutes or so of making water it's coming out (pure) starting around 20 before going down to 0 gradually, is this normal, I assume its just the RO getting up to full efficiency or something? It sits at 0 once it's there and doesn't go back up.
The water coming from the RO itself is around 12-14 so the resin is doing relatively little work.
Im using a booster pump by the way, just checking this all seems normal