Official reviewer for the new moerman squeegee

[James Allen]

I wouldn't need anything maybe over 18" so I will be fine lol

 

[Dave B]

My biggest at the mo is 18"

22s i have used in the past but i have no need for bigger ones

Shop windows are quick enough with a 14" channel used in my 0° swiveloc on a pole

No bending to get the bottoms

 

[James Allen]

I really want to try one of the 0 degree swiveloc but haven't got a good enough mod channel

 

[TolishAPurd]

My biggest at the mo is 18"22s i have used in the past but i have no need for bigger ones

Shop windows are quick enough with a 14" channel used in my 0° swiveloc on a pole

No bending to get the bottoms

Dave, if you are starting to do YT vids, is there any chance you can do a review of the swivellock+pole setup and show it in use please mate? Would be good to check it out.

 

[Dave B]

I will do a review on it tomorrow mate when i will need to use it anyway on a few jobs

This is the vid i did of me using it before

0° swiveloc for out of reach bottom windows: [media]http://www.youtube.com/watch?v=_jZyQlhBeCY[/media]

Didn't need to detail except the bottom edge but was showing how i would detail anyway

 

[Dave B]

James you don't need the channel to be spot on..mine is modded but the angle you use it at the dogear works better anyway than it does with the same channel in a 30° swiveloc

 

[Dave B]

I use this pole

http://www.windowcleaningwarehouse.co.uk/unger-optiloc-pole-system.html

But you can buy the end cone for a couple of quid and fit it to your own pole

And this is the handle

http://www.windowcleaningwarehouse.co.uk/unger-ergotec-swivel-loc-handle.html

It needs to be taken apart and sanded a little on all the touching edges where it pivots

Doesn't take long with a file and then fine paper and then it will swivel really loose like mine

 

[James Allen]

Ok dave I think I have over tweeked Mine again anyway liquidator can't come quick enough

 

[Dave B]

Bob is at the show in london this week so hopefully he will find out when it will be out

 

[James Allen]

I was on about going down but not sure if I am now

 

[Dave B]

I was gonna try to pop down and see him but i am working all week and fitting a new kitchen in my house in the evenings and won't be able to do the 1 - 1.5 hour drive to docklands in the evening traffic

Crazy thing is it is only a 40 minute drive if there were no cars in london

I either have to do 47 miles of a1m m25 m11 and then the north circular or 33ish miles mostly london main roads..a10 and then through tottenham and Walthamstow

Either way it is crazy

 

[James Allen]

Yeah I am up in Lincolnshire so I would do by train but I don't think I could get time off .

 

[Dave B]

You up near north sea camp??

Got mates in there lol

 

[James Allen]

I am in between lincoln and scunthorpe

 

[Dave B]

So you would have heard of the prison in boston then

Lincoln is ok..never been to Scunthorpe

 

[James Allen]

Yeah I have heard of it as my sister used to live there Boston I mean nor the prison lol

 

[Dave B]

I used to drive up to visit a mate and then throw bottles of vodka over the fence for my mates cellmate to pick up as he made a living running for the others

Open prison so was easy

 

[James Allen]

Naughty naughty lol

 

[James Allen]

Bob from polzn bladz shows a 18" on his YouTube page