TDS Advice. DI Filter not producing pure

[T2000]

Hello my water is entering my tank in my van at a tds of 28. I then use a di filter on board to produce pure on demand however the tds is ready 3-4? And advice on this? Thanks.

 

[Part Timer]

Hello my water is entering my tank in my van at a tds of 28. I then use a di filter on board to produce pure on demand however the tds is ready 3-4? And advice on this? Thanks.

You can still clean windows at that level, I personally don't go above 5. How many litres have you used since you last changed resin?

 

[T2000]

Well that's the strange thing I've just changed the resin over so I haven't used any yet? Will I still get good results at this level then Part Timer? Cheers.

 

[Julian Noddy Dean]

did you let it run  before checking the tds ? is allows for the old water that been sat in the hoses to be pushed out with the new water ? sometimes can take a couple of mins 

 

[Part Timer]

Well that's the strange thing I've just changed the resin over so I haven't used any yet? Will I still get good results at this level then Part Timer? Cheers.

You will but I would check what Julian said first because fresh resin should produce 000. If it isn't then you might not have reassembled your DI correctly and water might be bypassing. Or the resin is  :1f4a9: so further investigating is required

 

[doug atkinson]

What size is your vessel, how many litres!

What brand resin did you purchase!

Your DI Vessel where did you purchase it!

All of the above is relevant