O
OoO
Ours was 2ppm Yellow snow was 400023232ppmDid i see someone post up about tds reading of snow? I might check mine out /emoticons/smile.png
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Ours was 2ppm Yellow snow was 400023232ppmDid i see someone post up about tds reading of snow? I might check mine out /emoticons/smile.png
Yes yellow snow as in pee /emoticons/tongue.png AND no i didnt check it lol.2ppm or 0.2?
Our rain off the rear roof was about 007PPM but it was about 052ppm until we cleaned all the roof and gutters.Really damo thats mad might have to collect some !!!!
thats really good , on days off because of the snow it would of been worth shovelling it up and putting it in the tank LolReally damo thats mad might have to collect some !!!!
Our rain off the rear roof was about 007PPM but it was about 052ppm until we cleaned all the roof and gutters.
Make sure u fill resin up to the maxHad a problem today wondering if anyone has ever experienced this before? I use an ro and di system and have had 000ppm with this water for about 3 months now. Changed resin today and water would not go down to less than 015 which was the same as what was coming out of the ro. Took my di to the shop I bought the new resin from and they tested it without even changing resin or even position of cartridge inside and it went straight to zero. They even gave me new resin to use and when I gt home it was same issue. It's all in right position set up perfectly the resin is getting g wet and doesn't seem to be getting bypassed. It then went down to 002ppm And now back to 003-004. Really getting on my nerves leaving me u sure wether to fill up my tank or not. All equipment is fine and filters in ro. Any suggestions at all? I know it's a dificult one. An thinking to just buy new housing and cartridge but am scared I will have the same affect for some reason!