ChrisBlack84
Member
- Messages
- 21
- Location
- Dorset
Hi all
I'm ready to start investing into a pure water setup and start using wfp. I'm going to slowly build thr setup over the next couple of weeks.
Im going to start with the pure water then tank installation then finish of by adding a delivery system and wfp.
Pure water setup. I've tested my mains pressure which is 60psi, my tds level is currently sat at 275ppm. I've identified this prefilter. Do I need a 3 stage. What are the benefits of having 3. Should I just use the 2 and swap one to a sediment filter?
As for the RO I've picked out the below. With the membrane the pressure states 80psi for the ultra low and 100psi for the low. With my pressure at 60psi will I need a booster pump.
Di will be either of these below.
Any advice on plumbing the setup. I've not decided if I want the setup in the van or not.
Thanks
Chris
I'm ready to start investing into a pure water setup and start using wfp. I'm going to slowly build thr setup over the next couple of weeks.
Im going to start with the pure water then tank installation then finish of by adding a delivery system and wfp.
Pure water setup. I've tested my mains pressure which is 60psi, my tds level is currently sat at 275ppm. I've identified this prefilter. Do I need a 3 stage. What are the benefits of having 3. Should I just use the 2 and swap one to a sediment filter?
As for the RO I've picked out the below. With the membrane the pressure states 80psi for the ultra low and 100psi for the low. With my pressure at 60psi will I need a booster pump.
Di will be either of these below.
Any advice on plumbing the setup. I've not decided if I want the setup in the van or not.
Thanks
Chris