Welcome to the UK Window Cleaning Forums

Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

Challenging task?

WCF

Help Support WCF:

Lewis

Well-known member
Messages
380
Location
Plymouth
Hi all, we clean both side of this entrance every 4 weeks and the boss has just asked us to clean the roof,

Inside and out and the White cross member.

I'm thinking cherry picker? It has never been cleaned
b84fcc7453618f513a7953036f7361af.jpg
2926f8f3a46d6637dab56cc32278bbb2.jpg
7f2182222e321defe9292d05ae590e12.jpg


Sent from my iPhone using Tapatalk

 
The outside looks a piece of doddle, the inside however looks a right pig
Yeah out side is easy it's the inside roof that's gonna be a pain in the **** [emoji107]

Sent from my iPhone using Tapatalk

 
I'm not sure that cleaning the outside of the roof is going to be a doddle.

How do you plan to clean the outside?

H&S would require a safety barrier be installed down each side of that ledge you were standing on to take the photo.

Is the glass strong enough to stand on? Is it strong enough if you fell onto it.

If it is then H&S would require a safety harness and lanard secured to a safety line. Example;

Fall Protection Systems are Kee at the Castle • Kee Safety, UK

These safety lines need to be tested and a certificate issued each year. A couple of years ago in the Northeast testing a small installation was £450.00. Then there was in cost of installation to begin with.

A window cleaner fell through a glass roof of the Hilton Hotel in London about 10 years ago. Although the window cleaner only sustained minor injury, the Hilton got fined £40,000 for not providing the window cleaner a safe environment to work in.

Sorry, but I would pass this onto a company who is fully versed in the ins and outs of doing this type of work. With the greatest of respect to you, this is way above your level of expertise as it is mine.

 
Hiya, I took them as there is a a flat roof I could get a ladder up.

Currently the Plan is to hire a cherry picker for the outsides and we are still risk assessing the internal work to be completed.

Thank you spruce for a very valid response [emoji106][emoji106]

Sent from my iPhone using Tapatalk

 
Sorry, @Lewis. My response was probably a bit harsh this morning.

I would say that a cherry picker is probably the best way to do the outside. Insides are another story. We have 8 glass roof entrance canopies on the school we clean that are of the identical design. We do the tops off a tie up ladder. They are difficult to clean as they get full of seagull poop which gets baked on and there is very little slope for the water to drain off. The glass panels have a silicone filled gap which get full of lichen. It also leaks.

I can't get over how architects are still able to design a fancy building like this and still not engineer a safe working environment to clean from.

 
The inside could be done with a pole and zero degree squeegee by the look of it. That's how I do inside cony roofs and high up skylights.

With those stairs and different levels, not sure if scissor lift would be viable.

Outside - if that bit between the flat roof and the glass isn't too tall to work behind with WF poles, it can be used as the barrier wall between you and the glass. If its walled like that around the roof edge, or at least the area you are working is secure, then you don't need harnesses.

 
Last edited:
Back
Top