Claber 40 Metal Reel

[THL4KEL]

Has anyone got one of these reels -

https://www.keengardener.co.uk/claber-metal-40-wall-hose-reel.html?utm_source=google&utm_medium=cpc&gad_source=1&gclid=CjwKCAjw-O6zBhASEiwAOHeGxctyfnZaDe_V0UYvbPApOKpnxWEkO53A22GaaOTlXX_P1UsA93oVaBoCfBgQAvD_BwE

It says it can be used with 3/4 hose, but does anyone know if the reel connectors can be changed to 3/4 connectors as they look like 1/2inch connectors, which is a waste of time with a 3/4 hose? (I want to increase flow rate off garden taps)

 

[Iron Giant]

Has anyone got one of these reels -

https://www.keengardener.co.uk/claber-metal-40-wall-hose-reel.html?utm_source=google&utm_medium=cpc&gad_source=1&gclid=CjwKCAjw-O6zBhASEiwAOHeGxctyfnZaDe_V0UYvbPApOKpnxWEkO53A22GaaOTlXX_P1UsA93oVaBoCfBgQAvD_BwE

It says it can be used with 3/4 hose, but does anyone know if the reel connectors can be changed to 3/4 connectors as they look like 1/2inch connectors, which is a waste of time with a 3/4 hose? (I want to increase flow rate off garden taps)

Mate, surely you are only going to get what the tap delivers and no more regardless of the diameter of hose.

 

[THL4KEL]

Mate, surely you are only going to get what the tap delivers and no more regardless of the diameter of hose.

The tap outlet isn't 1/2. Its suppose to make a big difference using 3/4 hose with the 3/4 connectors.

 

[ched999uk]

Has anyone got one of these reels -

https://www.keengardener.co.uk/claber-metal-40-wall-hose-reel.html?utm_source=google&utm_medium=cpc&gad_source=1&gclid=CjwKCAjw-O6zBhASEiwAOHeGxctyfnZaDe_V0UYvbPApOKpnxWEkO53A22GaaOTlXX_P1UsA93oVaBoCfBgQAvD_BwE

It says it can be used with 3/4 hose, but does anyone know if the reel connectors can be changed to 3/4 connectors as they look like 1/2inch connectors, which is a waste of time with a 3/4 hose? (I want to increase flow rate off garden taps)

I have one, as far as I recall the outside fitting is a 3/4" bsp but inside I think is a hozeloc male - so small hole through the middle of that. I can't be positive as I put it together aver 2 years ago.

 

[THL4KEL]

I have one, as far as I recall the outside fitting is a 3/4" bsp but inside I think is a hozeloc male - so small hole through the middle of that. I can't be positive as I put it together aver 2 years ago.

Thanks Ched, it wouldn't be suitable.

 

[Mattymarske]

I have one, as far as I recall the outside fitting is a 3/4" bsp but inside I think is a hozeloc male - so small hole through the middle of that. I can't be positive as I put it together aver 2 years ago.

Yes you're right. Had 2 over the years running 120m of 6mm hose on.

 

[WindyinNorfolk]

the smaller fitting each end won't effect the flow as the water expands to fill the larger diameter which makes the water move faster then comes out at more pressure the other end - (as long as its just the fitting)
1/2 inch bore will slow the water speed down the longer the length due to smaller bore size.

 

[Deleted member 7446]

Has anyone got one of these reels -

https://www.keengardener.co.uk/claber-metal-40-wall-hose-reel.html?utm_source=google&utm_medium=cpc&gad_source=1&gclid=CjwKCAjw-O6zBhASEiwAOHeGxctyfnZaDe_V0UYvbPApOKpnxWEkO53A22GaaOTlXX_P1UsA93oVaBoCfBgQAvD_BwE

It says it can be used with 3/4 hose, but does anyone know if the reel connectors can be changed to 3/4 connectors as they look like 1/2inch connectors, which is a waste of time with a 3/4 hose? (I want to increase flow rate off garden taps)

In short your answer is no

Long answer: the advertised reel blurb is misleading as you can store 3/4" - 19mm hose on I but you'll always have a restriction at the inner manifold and generic hoselock style outlet of 12.5mm

You can't change or modify the inners

Check this out for context

Post from AW Services

In reply to a comment from @VXRHSV regarding the Claber ground 40 metal garden hose reel The comment was relating to the hose reel connector and through mani...

youtube.com

 

[THL4KEL]

Does anyone have a 3/4 inch hose reel ideally that can hold 50/40 meters of 3/4 hose that they can recommend? (Lighter the better)

 

[Deleted member 7446]

Does anyone have a 3/4 inch hose reel ideally that can hold 50/40 meters of 3/4 hose that they can recommend? (Lighter the better)

You're not going to be able to source a light-ish or lightweight hose reel for 3/4" hose and hold 40/50m that you'll simply lift into a van

Most large bore hoses of that size require a 4 wheel irrigation trolley or this option

HydroSure Heavy Duty 110m x 19mm Free Standing Hose Reel

This rust-resistant, free-standing hose reel is the best choice for professional heavy-duty hose storage. Combining maximum storage capacity with stability and engineered with the greatest care using high-quality materials, the frame is made entirely of steel.

www.waterirrigation.co.uk

 

[THL4KEL]

I haven't got space for that Austin.

 

[WindyinNorfolk]

I use the equiv. in my vans that take 50 meters of 3/4 - this is a mobile one ( no where the size of an irrigation monster reel

Low Pressure Manual Hose Reels Trolley 50/100m | Exchange Engineering

Low Pressure Manual Hose Reel Trolley, Available in 50m or 100m Versions Powder coated red paint finish over durable pressed Steel Complete with wheels 1/2″ female inlet thread x 1/2″ hose … Low Pressure Manual Hose Reels Trolley 50/100m Read More »

exchange-engineering.co.uk