chrissyman
Active member
- Messages
- 33
- Location
- Scotland
Looking for some pointers guys.
About to set up on my own and lookin at a few different things after reading this forum for a while. The info on heres second to none. In an ideal world what i m after is the 21 lpm loncin pressure washer. an x jet. And probably a trolley system with water fed pole. The services looking to offer is pressure washing the usual driveways/patio's etc maybe roofs. as well as cleaning the outside of fascias and guttering/conservatories that sort of thing. X jet for cladding/rendering. which may be a little bit optimistic at this point due to the inexperience maybe the x jets a purchase for the future once i had a handle of things. Although i d like to be in a position where a lack of equiptment wont hold me back.
Looking for any pointers tbh. kind of decided on the 21 lpm loncin but the trolley system suitable for above i m open to any advice etc same with the x-jet or anything else anybody thinks would be a good purchase. Fancying the rotary cleaner that is available with the loncin with the nozzles at the front but unsure if its necessary at tthis point due to budget constraints etc.
Budget of 1,600 but could be pushed further if people thought it would benefit me. If its a case of people saying look you ll need it all because theres a call for it all and maybe give services i could offer i would seriously consider going for it.
Pretty much made up my mind with the pressure washer.
Also wont include window cleaning as part of my service.
But any advice outside of that would be very much appreciated.
Cheers
Chris.
About to set up on my own and lookin at a few different things after reading this forum for a while. The info on heres second to none. In an ideal world what i m after is the 21 lpm loncin pressure washer. an x jet. And probably a trolley system with water fed pole. The services looking to offer is pressure washing the usual driveways/patio's etc maybe roofs. as well as cleaning the outside of fascias and guttering/conservatories that sort of thing. X jet for cladding/rendering. which may be a little bit optimistic at this point due to the inexperience maybe the x jets a purchase for the future once i had a handle of things. Although i d like to be in a position where a lack of equiptment wont hold me back.
Looking for any pointers tbh. kind of decided on the 21 lpm loncin but the trolley system suitable for above i m open to any advice etc same with the x-jet or anything else anybody thinks would be a good purchase. Fancying the rotary cleaner that is available with the loncin with the nozzles at the front but unsure if its necessary at tthis point due to budget constraints etc.
Budget of 1,600 but could be pushed further if people thought it would benefit me. If its a case of people saying look you ll need it all because theres a call for it all and maybe give services i could offer i would seriously consider going for it.
Pretty much made up my mind with the pressure washer.
Also wont include window cleaning as part of my service.
But any advice outside of that would be very much appreciated.
Cheers
Chris.