Streamline flow controller

[Deleted member 7446]

Is your system something you've fitted your or a ready DIY built van?

 

[Jonnyavfc]

Is your system something you've fitted your or a ready DIY built van?

It was fitted by a company about 4 years ago. I've messaged them and sent them some pics but not heard back from them yet

 

[Deleted member 7446]

It was fitted by a company about 4 years ago. I've messaged them and sent them some pics but not heard back from them yet

Odd how the black wire is on the positive side ! Was it longer and somehow shorted something. Where do the others wires go?

 

[Ian Sheppard]

Hi Jonny I would agree with AW regard the terminal connectors I would also suggest changing the wiring and fuse?fuse holders. Halfords sell 1mm Tri rated cable and snap lock fuses. Ideally I would use Red Cable Battery + to Controller, And Black Battery Negative to the controller. Then use Brown controller to pump positive and Blue cable controller to pump negative.

I would suspect the black cable on the battery positive is either connected to the Van battery if you have a split relay or the Controller Red ( Positive ) and the have just used a different colour cable as they ran out of Red

Cheers

 

[Deleted member 7446]

Hi Jonny I would agree with AW regard the terminal connectors I would also suggest changing the wiring and fuse?fuse holders. Halfords sell 1mm Tri rated cable and snap lock fuses. Ideally I would use Red Cable Battery + to Controller, And Black Battery Negative to the controller. Then use Brown controller to pump positive and Blue cable controller to pump negative.

I would suspect the black cable on the battery positive is either connected to the Van battery if you have a split relay or the Controller Red ( Positive ) and the have just used a different colour cable as they ran out of Red

Cheers

Hope you're well, Ian

There's nothing worse than an incorrect low voltage conductor colour choice

I've repaired and rewired a few vans recently who have "had a mate do it" and most are a fire waiting to happen.

Say hello to the team at Spring

Austin

 

[Ian Sheppard]

Hi Austin.

Yes I am good thank you. I hope you are too

Cheers
Ian

 

[Jonnyavfc]

Hi Jonny I would agree with AW regard the terminal connectors I would also suggest changing the wiring and fuse?fuse holders. Halfords sell 1mm Tri rated cable and snap lock fuses. Ideally I would use Red Cable Battery + to Controller, And Black Battery Negative to the controller. Then use Brown controller to pump positive and Blue cable controller to pump negative.

I would suspect the black cable on the battery positive is either connected to the Van battery if you have a split relay or the Controller Red ( Positive ) and the have just used a different colour cable as they ran out of Red

Cheers

It was the controller in the end ! Ordered a new v16 fitted it and all good now. Thanks for you help and advice