Welcome to the UK Window Cleaning Forums

Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

Varistream cutting out and its not the battery?

WCF

Help Support WCF:

Blade Runner

Member
Messages
7
Location
Scotland
Hey, 

so i have come on to this forum and found very helpful answers in the past but thought it was time i actually join properly all the more so as i have a question that i need a bit of expertise in solving.

so my varistream controller kept cutting out and i just thought it was my battery as when i first started out i did abuse the leisure battery a bit before i learned more about how to look after them. So recently i bought a numax leisure battery but first day using, the varistream cut out and showed the dreaded U symbol. i was able to switch off and on again (a long tried and tested solution) and it came back on long enough to finish the job so i believe it is highly unlikely a brand new leisure battery that was recommended on here is the problem

so my question is this: what do you think the problem is? maybe a weak wire connection or blown fuse or is it just a fail safe that if im overloading the pump with too much build up in pressure with the univalve in use that it cuts out as a protective measure?

any help would be greatly appreciated also i wanted to @spruce as i have seen that you are often the man to ask

thanks

 
Last edited by a moderator:
Morning Bladerunner. I would agree with Spruces comments. Also adding to that a Brand new battery could still have a low charge. Depending on how long it has been sat on a shelf parasitic discharge can occur. This means that just sat connected or not a battery can lose up to 5% of its capacity over the space of a week. For example a 80 amp hour battery could lose 4 amps a week just sat on the shelf. A bench charge with a mains charger overnight will sort that out. Also as Spruce comments knowing your battery charging regime would be useful as if your using a Split relay only the issue could be there.

 

Latest Posts

Back
Top