Aquatap / Trolley help needed please

Discussion in 'Water Fed Pole Cleaning' started by gwindows, Jan 31, 2016.

Advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the UK Window Cleaning Forums.
    Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

  1. gwindows

    gwindows Member
    Member

    Joined:
    Nov 29, 2013
    Messages:
    70
    Likes Received:
    8
    Hi all I'm having a wee problem with my pure trolley system . I have an aquatap on the top and the water has started taking its time to come out when i turn it on .It starts with a few wee squirts of water then after maybe 4/5 seconds it starts running properly .Its like there is something stuck or an air lock !! Also when brushing the window it seen to go off also .
    I have tried running flat out to see if theres any blockage .
    Cheers in advance
     
    Advertisement
  2. jdp

    jdp Newcomer
    Member

    Joined:
    Feb 8, 2015
    Messages:
    4
    Likes Received:
    3
    Hii gwindows, I get tis problem with the air locks, what I do
    is when ive changed the barrels over, lay your pole and hose on the ground
    with everything turned on, like your tap or aqua adapter, and switch on, should only take about ten seconds for it to run properly,
    as for the water going off when cleaning, check your calibration on control is higher thsn your speed, hopd this helps,
     
  3. gwindows

    gwindows Member
    Member

    Joined:
    Nov 29, 2013
    Messages:
    70
    Likes Received:
    8
    took out the pump valve and gave it a good clean :):) it wasn't that dirty just a tiny bit colour in it .:confused: but its going like a rocket again , Cheers for the reply :D:cool:
     
Advertisement